Dekonil Stropiyer Plasterboard 12 cm (DS-107-S)

Product Dimension: W:200cm x D:0.9cm x H:12cm

They are 2 meters tall as standard. On our site, the border is written as 1 meter price. Since they are 2 meters in length, buy 2 meters and its multiples.

These products, also known as styrofoam or stropier, which replace plaster, can be applied easily with the help of a brush and mastic, do not leave dust and dirt, and are very easy to clean. While plaster moisture and humidity penetrate the stropier, the foam also insulates by preventing the formation of moisture and humidity. The stropier papier-mâché models, which are applied to the walls for decoration purposes, can be painted with water-based or plastic paints if desired.

First of all, the ceiling and wall surface where you will make the plaster board should be clean. The print dimensions of the plaster board you will apply are marked from the upper corner of the wall downwards. By using dyed yarn (whisk yarn), it is ensured that the measurement lines are evident from right to left.

Using the cutting tool, the inner and outer edge cuts are adjusted. You can also request the cutting tool from the store where you bought the plaster board.

Powder adhesive is sprinkled with water at a ratio of 1/1.5 and mixed until it reaches the consistency of yoghurt. Freezing time is 30-45 minutes. You can use it for both bonding and retouching.

Apply sufficient amount to the upper and lower parts of the papier-mâché. Stick it in such a way that the adhesive does not overflow. It will be beneficial for the adhesive to overflow, both to prevent it from cracking and for the retouching process.

Stick it to coincide with the place where we lined up with the previously painted rope. Apply carefully so that the corners are mouth to mouth. You can use the overflowing adhesive for retouching.